View HSMZ-A100-R00J1_3765799.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

description this family of smt leds is packaged in the industry standard plcc-2 package. these smt leds have high reliability performance and are designed to work under a wide range of environmental conditions. this high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. to facilitate easy pick & place assembly, the leds are packed in eia-compliant tape and reel. every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. agilent hsmx-a10x-xxxxx plcc-2 surface mount led indicator data sheet features ? industry standard plcc-2 package ? high reliability led package ? high brightness using alingap and ingan dice technologies ? available in full selection of colors ? super wide viewing angle at 120? ? available in 8 mm carrier tape on 7 inch reel (2000 pieces) ? compatible with both ir and ttw soldering process applications ? interior automotive Cinstrument panel backlighting Ccentral console backlighting Ccabin backlighting ? electronic signs and signals Cinterior full color sign Cvariable message sign ? office automation, home appli- ances, industrial equipment Cfront panel backlighting Cpush button backlighting Cdisplay backlighting caution: hsmn-, hsmm-, and hsmk-a10x-xxxxx leds are class 2 esd sensitive. please observe appropriate precautions during handling and processing. refer to agilent application note an-1142 for additional details. these leds are compatible with ir solder reflow process. due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. the super wide viewing angle at 120? makes these leds ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. the flat top emitting surface makes it easy for these leds to mate with light pipes. with the built-in reflector pushing up the intensity of the light output, these leds are also suitable to be used as led pixels in interior electronic signs.
2 package dimensions 0.8 ?0.3 3.5 ?0.2 2.8 ?0.2 0.5 ?0.1 3.2 ?0.2 2.2 ?0.2 1.9 ?0.2 0.1 typ. 0.8 ?0.1 cathode marking (anode marking for algaas devices) note: all dimensions in mm.
3 device selection guide color part number min i v @ 20 ma (mcd) typical i v @ 20 ma (mcd) dice technology red hsms-a100-j00j1 4.0 15.0 gap hsms-a100-l00j1 10.0 15.0 hsmh-a100-l00j1 10.0 50.0 as algaas hsmh-a100-n00j1 25.0 50.0 hsmc-a100-j00j1 4.0 100.0 as alingap hsmc-a100-q00j1 63.0 100.0 hsmc-a100-r00j1 100.0 140.0 hsmc-a101-s00j1 160.0 240.0 HSMZ-A100-R00J1 100.0 400.0 ts alingap red orange hsmj-a100-q00j1 63.0 200.0 as alingap hsmj-a101-s00j1 160.0 240.0 hsmv-a100-r00j1 100.0 350.0 ts alingap orange hsmd-a100-j00j1 4.0 15.0 gap hsmd-a100-l00j1 10.0 15.0 hsml-a100-q00j1 63.0 160.0 as alingap hsml-a101-s00j1 160.0 330.0 yellow /amber hsmy-a100-j00j1 4.0 12.0 gap hsmy-a100-l00j1 10.0 12.0 hsma-a100-q00j1 63.0 100.0 as alingap hsma-a101-s00j1 160.0 330.0 hsmu-a100-r00j1 100.0 270.0 ts alingap yellow green hsmg-a100-j02j1 4.0 18.0 gap hsme-a100-m02j1 16.0 70.0 as alingap emerald green hsmg-a100-h01j1 2.5 8.0 gap hsme-a100-l01j1 10.0 40.0 as alingap green hsmm-a101-r00j1 100.0 200.0 ingan hsmm-a100-s00j1 160.0 280.0 cyan hsmk-a101-r00j1 100.0 170.0 ingan hsmk-a100-s00j1 160.0 280.0 blue hsmb-a100-j00j1 4.0 15.0 gan hsmn-a101-n00j1 25.0 50.0 ingan hsmn-a100-p00j1 40.0 70.0 note: 1. the luminous intensity, i v , is measured at the mechanical axis of the lamp package. the actual peak of the spatial radiation pattern may not be aligned with this axis.
4 packaging option color bin selection intensity bin select device specific configuration package type led chip color hsm x 1 - a x 2 x 3 x 4 - x 5 x 6 x 7 x 8 x 9 part numbering system absolute maximum ratings (t a = 25 c) parameters gap algaas as alingap ts alingap gan/ingan hsms/d/g/y hsmh hsmc/j/l/a hsme hsmv/u/z hsmb/n/k/m dc forward current [1] 30 ma 30 ma 30 ma [3,4] 20 ma [3,4] 30 ma [3,4] 30 ma peak forward current [2] 100 ma 100 ma 100 ma 100 ma 100 ma 100 ma power dissipation 63 mw 60 mw 63 mw 48 mw 72 mw 114 mw reverse voltage 5 v junction temperature 110 c operating temperature C55 c to +100 c storage temperature C55 c to +100 c notes: 1. derate linearly as shown in figure 4. 2. duty factor = 10%, frequency = 1 khz. 3. drive current between 10 ma and 30 ma is recommended for best long term performance. 4. operation at current below 5 ma is not recommended.
5 electrical characteristics at t a = 25?c forward voltage reverse voltage reverse voltage thermal v f (volts) @ i f = 20 ma v r @ 100 m av r @ 10 m a resistance dice technology typ. max. min. min. r q jp ( c/w) gap 2.2 2.6 5 180 as algaas 1.9 2.6 5 180 as alingap 1.9 2.4 5 280 ts alingap 2.2 2.6 5 280 gan 3.9 4.3 5 280 ingan 3.4 4.05 5 280 optical characteristics at t a = 25?c viewing luminous peak dominant angle luminous intensity/ wavelength wavelength 2 q 1/2 efficacy h v [5] total flux dice l peak (nm) l d (nm) (degrees) (lm/w) i v (mcd)/ f v (mlm) color part number technology typ. typ. typ. typ. typ. red hsms-a100 gap 635 626 120 120 0.45 hsmh-a100 as algaas 645 637 120 63 0.45 hsmc-a10x as alingap 635 626 120 150 0.45 hsmz-a100 ts alingap 639 630 120 155 0.45 red orange hsmj-a10x as alingap 621 615 120 240 0.45 hsmv-a100 ts alingap 623 617 120 263 0.45 orange hsmd-a100 gap 600 602 120 380 0.45 hsml-a10x as alingap 609 605 120 320 0.45 amber hsmy-a100 gap 583 585 120 520 0.45 hsma-a10x as alingap 592 590 120 480 0.45 hsmu-a100 ts alingap 594 592 120 500 0.45 yellow green hsmg-a100 gap 565 569 120 590 0.45 hsme-a100 as alingap 575 576 120 620 0.45 emerald green hsmg-a100 gap 558 560 120 650 0.45 hsme-a100 as alingap 566 567 120 tbd 0.45 green hsmm-a10x ingan 523 525 120 500 0.45 cyan hsmk-a10x ingan 502 505 120 300 0.45 blue hsmb-a100 gan 428 462 120 65 0.45 hsmn-a10x ingan 468 470 120 75 0.45 notes: 1. the dominant wavelength, l d , is derived from the cie chromaticity diagram and represents the color of the device. 2. q 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. radiant intensity, i e in watts/steradian, may be calculated from the equation i e = i v / h v , where i v is the luminous intensity in candelas and h v is the luminous efficacy in lumens/watt.
6 figure 1. relative intensity vs. wavelength. figure 2. forward current vs. forward voltage. figure 3. relative intensity vs. forward current. figure 4. maximum forward current vs. ambient temperature. derated based on t j max = 110?c, r q ja = 500?/w. 020 dc forward current ?ma 0 0.4 1.8 relative luminous intensity (normalized at 20 ma) 35 0.8 0.2 1.0 10 0.6 1.2 25 alingap gap 515 30 1.4 1.6 algaas gan ingan 0 35 0 20 60 80 120 current ?ma temperature ?? 40 20 25 15 algaas 10 30 100 ts alingap/ gap 5 as alingap ingan/gan wavelength ?nm relative intensity 1.0 0.8 0 380 480 580 680 730 780 630 530 430 gan blue gap emerald green gap orange gap red 0.6 0.4 0.2 gap yellow gap yellow green 03 forward voltage ?v 0 10 30 35 forward current ?ma 5 5 20 15 25 12 4 as alingap ingan algaas gap ts alingap gan blue figure 5. dominant wavelength vs. forward current C ingan devices. 020 current ?ma 460 480 540 dominant wavelength ?nm 35 500 470 510 10 490 520 25 green 515 30 530 cyan blue wavelength ?nm emerald green relative intensity 1.0 0.8 0 380 480 580 680 730 780 630 530 430 blue cyan 0.6 0.4 0.2 green yellow green amber orange red orange red 0.1 0.3 0.5 0.7 0.9
7 figure 9. recommended soldering pad pattern. 2.60 4.50 1.50 solder resist figure 8. recommended reflow soldering profile. 240? max. 20 sec. max. 3?/sec. max. 120 sec. max. time temperature 183? 100-150? ??/sec. max. 60-150 sec. 3?/sec. max. figure 7. radiation pattern. normalized intensity 1.0 0 angular displacement ?degrees 0.8 0.6 0.2 0.4 -70 -50 -30 0 2030507090 -90 -20 -80 -60 -40 -10 10 40 60 80 figure 8a. recommended wave soldering profile. 240-245? 10-40 sec. 2-3?/sec. time temperature above 183? pre-heat 120-180? 6?/sec. max. delta v f (normalized at 25?) -0.3 -100 temperature ?? 0.5 0.4 0.2 0.1 0 -0.2 150 50 -50 0 100 -0.1 0.3 gap/algaas/ alingap ingan/gan figure 6. forward voltage shift vs. temperature.
8 figure 10. tape leader and trailer dimension. 200 mm min. for ? 180 reel. 200 mm min. for ? 330 reel. trailer component leader 480 mm min. for ? 180 reel. 960 mm min. for ? 330 reel. c a user feed direction figure 11. tape dimension. c a 4 ?0.1 4 ?0.1 2 ?0.05 3.05 ?0.1 3.5 ?0.05 8 +0.3 ?.1 1.75 ?0.1 3.81 ?0.1 2.29 ?0.1 0.229 ?0.01 8 ? 1.5 +0.1 ? ? 1 +0.1 ?
9 baking is required under the fol- lowing conditions: a) the humidity indicator turns pink b) the pack has been opened for more than four weeks. baking recommended condition: 60 5?c for 20 hours. this product is qualified as mois- ture sensitive jedec level 2a. figure 12. reel dimension. 14.4 (max. measured at hub) 7.9 (min.) 10.9 (max.) 62.5 2 +0.5 ? 20.5 ?0.3 13 ?0.2 +0 ?.5 8.4 (measured at outer edge) +1.50 ?.00 180 label area (111 mm x 57 mm) with depression (0.25 mm) figure 13. reeling orientation. cathode side printed label user feed direction
intensity bin select (x 5 x 6 ) individual reel will contain parts from one half bin only. x 5 min i v bin x 6 0 full distribution 3 3 half bins starting from x 5 1 4 4 half bins starting from x 5 1 5 5 half bins starting from x 5 1 7 3 half bins starting from x 5 2 8 4 half bins starting from x 5 2 9 5 half bins starting from x 5 2 intensity bin limits bin id min. (mcd) max. (mcd) g1 1.80 2.24 g2 2.24 2.80 h1 2.80 3.55 h2 3.55 4.50 j1 4.50 5.60 j2 5.60 7.20 k1 7.20 9.00 k2 9.00 11.20 l1 11.20 14.00 l2 14.00 18.00 m1 18.00 22.40 m2 22.40 28.50 n1 28.50 35.50 n2 35.50 45.00 p1 45.00 56.00 p2 56.00 71.50 q1 71.50 90.00 q2 90.00 112.50 r1 112.50 140.00 r2 140.00 180.00 s1 180.00 224.00 s2 224.00 285.00 t1 285.00 355.00 t2 355.00 450.00 u1 450.00 560.00 u2 560.00 715.00 v1 715.00 900.00 v2 900.00 1125.00 tolerance of each bin limit = 12%. color bin select (x 7 ) individual reel will contain parts from one full bin only. x 7 0 full distribution z a and b only y b and c only w c and d only v d and e only u e and f only t f and g only s g and h only q a, b, and c only p b, c, and d only n c, d, and e only m d, e, and f only l e, f, and g only k f, g, and h only 1 a, b, c, and d only 2 e, f, g, and h only 3 b, c, d, and e only 4 c, d, e, and f only 5 a, b, c, d, and e only 6 b, c, d, e, and f only color bin limits blue min. (nm) max. (nm) a 460.0 465.0 b 465.0 470.0 c 470.0 475.0 d 475.0 480.0 green min. (nm) max. (nm) a 515.0 520.0 b 520.0 525.0 c 525.0 530.0 d 530.0 535.0 cyan min. (nm) max. (nm) a 490.0 495.0 b 495.0 500.0 c 500.0 505.0 d 505.0 510.0 color bin limits emerald green min. (nm) max. (nm) a 552.5 555.5 b 555.5 558.5 c 558.5 561.5 d 561.5 564.5 orange min. (nm) max. (nm) a 597.0 600.0 b 600.0 603.0 c 603.0 606.0 d 606.0 609.0 e 609.0 612.0 red orange min. (nm) max. (nm) a 611.0 616.0 b 616.0 620.0 red min. (nm) max. (nm) full distribution tolerance of each bin limit = 1 nm. x 8 x 9 j1 20 ma test current, top mount, 7 inch reel j2 10 ma test current, top mount, 7 inch reel amber min. (nm) max. (nm) a 582.0 584.5 b 584.5 587.0 c 587.0 589.5 d 589.5 592.0 e 592.0 594.5 f 594.5 597.0 yellow green min. (nm) max. (nm) e 564.5 567.5 f 567.5 570.5 g 570.5 573.5 h 573.5 576.5 10
www.agilent.com/semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (408) 654-8675 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6271 2451 india, australia, new zealand: (+65) 6271 2394 japan: (+81 3) 3335-8152(domestic/interna- tional), or 0120-61-1280(domestic only) korea: (+65) 6271 2194 malaysia, singapore: (+65) 6271 2054 taiwan: (+65) 6271 2654 data subject to change. copyright ? 2002 agilent technologies, inc. obsoletes 5988-7658en november 1, 2002 5988-8257en

▲Up To Search▲

Price & Availability of HSMZ-A100-R00J1

	To Download HSMZ-A100-R00J1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .